Double Time Calculator

Enter your regular hourly rate and split your hours into regular, time-and-a-half, and double-time blocks, or let the California day and 7th-day modes split one day for you, to see what each block pays, your total gross pay, and your blended effective hourly rate.

2026 tax figures · reviewed October 2026

Updated for 2026 IRS-verified tax data How we calculate Your numbers stay in your browser
The Double Time Calculator: split your hours into regular, time-and-a-half, and double time to get total pay and your blended hourly rate. Enter your regular rate and hours to see your double-time rate, overtime pay, and total weekly earnings. Free forever, with no signup needed, and your numbers never leave your browser.

How is double time calculated?

Double time pays twice your regular hourly rate for the hours that qualify. Multiply your rate by 2, then by the double-time hours: at $22 an hour, 4 double-time hours pay $176.00. Add the regular and time-and-a-half blocks for the full week.

Enter my hours prices blocks you already know. The California modes split one day by Labor Code Section 510.
$
hrs
Only used in the California modes: hours in one workday, or hours on the seventh consecutive day.
days
Only used in California day mode, 1 to 6. The week total assumes every day worked the same hours. Price a seventh consecutive day separately.
hrs
Hours paid at your straight rate. Only used in Enter my hours mode.
hrs
Hours paid at 1.5x, e.g. past 40 in a week or hours 9 to 12 in a California workday. Only used in Enter my hours mode.
hrs
Hours paid at 2x, e.g. past 12 in a California workday or past 8 on a seventh straight day. Only used in Enter my hours mode.
100% Free No Signup Needed Private, runs in your browser

Why use this calculator

  • Split your hours into regular, time-and-a-half, and double time to get total pay and your blended hourly rate.
  • Instant results, with a full breakdown of every number.
  • Every formula is shown on the page, so you can verify each number yourself.
  • Free forever, no signup, and your numbers never leave your browser.

Save this to Pinterest

Save to Pinterest
Quick answer: At $22 an hour, a 50-hour week of 40 regular hours, 6 time-and-a-half hours, and 4 double-time hours pays $880.00 + $198.00 + $176.00 = $1,254.00, a blended rate of $25.08 an hour.

Double time is not required by federal law. It applies where an employer's policy or a union contract promises it, and in California, where state law requires double time after 12 hours in a workday and for hours past 8 on the seventh consecutive day of work.

What double time is

Double time is a premium pay rate equal to twice your regular hourly rate. Earn $22 an hour and your double-time rate is $44; every hour paid at double time puts two hours of money on your check. It is the top rung of premium pay, one step above the time and a half that federal overtime law uses, and it is rare: most American workers are never paid a single double-time hour in their careers.

Where it exists, double time marks the hours employers consider the hardest to staff: the tail end of very long shifts, seventh consecutive days, Sundays and holidays in union shops, emergency call-ins. Because it is expensive, employers guard the triggers carefully, and the rules for earning it are written down in exactly three places: one state's law, your union contract, or your employer's policy. The time and a half calculator covers the 1.5x rung of the ladder; this page is about the 2x rung.

Double time pay by hourly rate

Double time is simply twice your regular rate, so the math is one multiplication. Find your hourly rate below to see the double-time rate and what 2, 4, and 8 hours at that rate pay. Every figure is the regular rate times two, then times the hours shown.

Hourly rateDouble-time rate2 hours4 hours8 hours
$15$30$60$120$240
$20$40$80$160$320
$25$50$100$200$400
$30$60$120$240$480
$40$80$160$320$640
$50$100$200$400$800

When double time applies

Start with what does not create double time: federal law. The Fair Labor Standards Act requires time and a half for hours past 40 in a workweek and says nothing about a 2x rate anywhere. No federal statute mandates double time, a point the U.S. Department of Labor's overtime guidance makes clear by omission: 1.5x is the federal ceiling as well as the floor.

California is the one state with a general double-time law. Under rules enforced by the California Department of Industrial Relations, hours worked past 12 in a single workday are paid at double the regular rate. On the seventh consecutive day of work in a workweek, the first 8 hours are paid at time and a half and every hour past 8 is paid at double time. Hours 9 through 12 in a normal California workday sit in between, at time and a half.

Everywhere else, double time is negotiated or volunteered. Union contracts in the building trades, healthcare, entertainment, and manufacturing commonly trigger double time for Sundays, holidays, hours past 10 or 12 in a day, or short-turnaround shifts. Some non-union employers match those terms where skilled labor is scarce. If your pay stub ever shows a 2x line, one of those documents is behind it, so read the overtime article of your contract or the premium section of your handbook to find your exact triggers.

Double time vs time and a half

The two rates answer different questions. Time and a half is the legally required overtime rate, owed to nonexempt workers nationwide once hours pass the federal or state threshold. Double time is an extra premium layered on top in the specific situations described above. At $22 an hour, the ladder looks like this: regular time pays $22, time and a half pays $33, and double time pays $44 for the same hour of work.

Inside a long California day you can climb the whole ladder in one shift. The first 8 hours pay your regular rate. Hours 9 to 12 pay time and a half. Every hour past 12 pays double time. A 14-hour day at $22 an hour therefore pays 8 x $22 plus 4 x $33 plus 2 x $44, which is $176 + $132 + $88 = $396, compared with $308 if the entire day were paid at straight time. The overtime calculator prices the federal weekly version of this math; this calculator prices the three-block split directly.

How the three rates combine in one paycheck

Payroll handles a mixed week in blocks. Each hour you work is assigned to exactly one block, the regular block, the time-and-a-half block, or the double-time block, and each block is paid at its own rate. The same hour is never paid at two premiums at once; payroll people call the forbidden version pyramiding, and both the FLSA framework and California's rules are built to assign each hour once.

The blended rate this calculator shows is the week's average: total pay divided by total hours. It is the fastest way to compare two schedules or two job offers with different premium mixes. A 50-hour week at a flat $25 an hour with no premiums pays $1,250, while the worked example on this page, 50 hours at a $22 base rate with premiums, pays $1,254. The lower base rate wins once the double-time block is counted, which is exactly the kind of comparison a blended rate makes visible. For the rest of your pay scenarios, the calculators hub has the matching tool.

Double time and taxes

Double-time pay is taxed exactly like the rest of your wages. There is no special double-time bracket: the money is ordinary income, subject to federal income tax at your marginal rate, Social Security and Medicare taxes, and your state income tax where one applies. Your employer withholds on it the same way it withholds on regular pay, although a premium-heavy check can be withheld as if the higher amount were your normal rate, which sorts itself out when you file.

One current nuance is worth knowing. Federal law now allows a deduction for the premium portion of certain overtime pay, the half of time and a half that sits above your regular rate, subject to limits and to the overtime being of the kind the deduction covers. Premium pay beyond what the Fair Labor Standards Act requires, including most double time, is treated more narrowly, so do not assume the whole premium slice of a double-time check is deductible. The overtime tax calculator works through the deduction rules with your numbers, and the holiday pay calculator prices the other premium that often stacks into the same weeks.

Checking your pay stub for double time

Double time usually appears on a pay stub as its own line, labeled DT, 2.0x, or double time, with its own hours and rate. Check three things: the rate on that line is exactly twice your regular rate, the hours match the trigger in your contract or, in California, the hours past 12 in a day or past 8 on a seventh day, and no hour is missing from the blocks above it. Long shifts are where payroll errors cluster, because a single day can span all three rates.

One definition decides most disputes: double time is twice your regular rate, and the regular rate is a legal term, not just your base wage. Under federal regular-rate rules, shift differentials and non-discretionary bonuses are folded into the rate before the multiplier is applied. If you earn a $2 night differential, your double-time rate is built on the blended rate, not the base. If your stub's 2x line is built on the bare base wage while you earn differentials, that gap is worth a conversation with payroll.

How this calculator was checked

This calculator was checked on November 16, 2026. A test harness ran the calculator code itself on 12 manual-hours cases and 20 California-mode cases, and an independent Python check recomputed every expected value from the rules as written, with no shared code. Every case matched to the cent, and the manual-hours cases reproduce the original results byte for byte. Validation checks confirmed that out-of-range inputs are rejected in every mode.

The California rules come from Labor Code Section 510 as stated in the California Department of Industrial Relations Overtime FAQ, verified November 16, 2026. The federal limit comes from the U.S. Department of Labor FLSA Questions and Answers page, which states that the FLSA has no requirement for double time pay. The full annotated source list is at the foot of this page.

Limits of this check. Federal law does not require double time, so the Enter my hours mode prices whatever blocks you enter under your contract or policy, and it cannot confirm your contract triggers. The California modes summarize the general rules for nonexempt employees on a standard schedule. They do not model alternative workweek schedules, industry exceptions, or other states' daily overtime rules, and they are not legal advice. The rate you enter should be your regular rate, including shift differentials and nondiscretionary bonuses as the DIR FAQ describes, not just your base wage where those apply.

Check caseInputsRegular / 1.5x / 2x hoursTotal pay
Manual hours, 50-hour week$22 rate, 40 regular, 6 at 1.5x, 4 at 2x40 / 6 / 4$1,254.00
California day, 10 hours$22 rate, 10 hours, 1 day8 / 2 / 0$242.00
California day, 14 hours$22 rate, 14 hours, 1 day8 / 4 / 2$396.00
California day, 12 hours$22 rate, 12 hours, 1 day8 / 4 / 0$308.00
California 7th day, 10 hours$22 rate, 10 hours on the 7th day0 / 8 / 2$352.00
California 7th day, 8 hours$22 rate, 8 hours on the 7th day0 / 8 / 0$264.00

The double time formula

Split the hours into three blocks, pay each block at its own rate, and add the blocks together. In the California modes the split follows Labor Code Section 510:

Regular pay = Hourly rate x Regular hours
Time-and-a-half pay = Hourly rate x 1.5 x Time-and-a-half hours
Double-time pay = Hourly rate x 2 x Double-time hours
Total pay = Regular pay + Time-and-a-half pay + Double-time pay
Blended rate = Total pay / Total hours
California day: first 8 hours at straight rate, hours 9 to 12 at 1.5x, hours past 12 at 2x
California 7th day: first 8 hours at 1.5x, hours past 8 at 2x

Worked example: a 50-hour week with all three rates

You earn $22 an hour and work 50 hours in a week: 40 regular hours, 6 hours at time and a half, and 4 hours at double time. That mix is typical of a California schedule with one very long day, or of a union contract with a double-time trigger for extra-long shifts.

Regular pay: 40 hours x $22.00 = $880.00. Time-and-a-half pay: the 1.5x rate is $33.00 an hour, so 6 hours x $33.00 = $198.00. Double-time pay: the 2x rate is $44.00 an hour, so 4 hours x $44.00 = $176.00.

Total pay: $880.00 + $198.00 + $176.00 = $1,254.00 for 50 hours of work. Blended rate: $1,254.00 / 50 hours = $25.08 an hour. The premiums lifted the week $154.00 above the $1,100 the same hours would have paid at straight time.

How to use this calculator

  1. Choose how to enter your hours: Enter my hours for blocks you already know, California day to split one workday by California rules, or California 7th day for the seventh consecutive day of a workweek.
  2. Enter your regular hourly rate, the rate before any premium is applied. In the California modes this should be your regular rate as the DIR FAQ defines it, including shift differentials where they apply.
  3. In Enter my hours, enter the hours paid at your regular rate, at time and a half, and at double time. In a California mode, enter the hours worked in the day instead, and the tool splits them for you.
  4. In California day mode, enter how many days worked that same pattern, from 1 to 6, to scale one day to a week. The week total assumes every day matched. A seventh consecutive day is priced separately.
  5. Read the pay for each block, the total, and the blended rate, the average your hours really earned. Each California result states the rule it applied.

Related calculators

Sources

Frequently asked questions

What is double time pay?

Double time is a premium rate of twice your regular hourly rate. At $22 an hour, double time pays $44 an hour. It is required by law only in California, after 12 hours in a workday and for hours past 8 on a seventh consecutive workday, and elsewhere it comes from union contracts or employer policy.

Does federal law require double time?

No. The Fair Labor Standards Act requires time and a half for hours past 40 in a workweek and sets no 2x rate. No federal statute mandates double time. If you earn it outside California, a union contract or your employer's written policy is the reason.

When does California require double time?

California requires double the regular rate for hours worked past 12 in a single workday. On the seventh consecutive day of work in a workweek, the first 8 hours are paid at time and a half and every hour after 8 is paid at double time. Hours 9 to 12 in a normal workday are time and a half.

How is double time calculated?

Multiply your regular hourly rate by 2, then by your double-time hours. At $22 an hour, the double-time rate is $44 and 4 double-time hours pay $176.00. Add the regular and time-and-a-half blocks for the full total: 40 regular hours ($880.00) plus 6 time-and-a-half hours ($198.00) plus those 4 double-time hours comes to $1,254.00.

What is a blended hourly rate?

Your blended rate is total pay divided by total hours, the single average rate your week really earned. The 50-hour week on this page pays $1,254.00, so its blended rate is $25.08 an hour even though the base rate is $22. It is the fairest way to compare schedules or job offers with different premium mixes.

Is double time taxed differently from regular pay?

No. Double-time pay is ordinary wage income, taxed at your normal federal income tax rate plus Social Security, Medicare, and state tax where it applies. The premium portion of some overtime may qualify for the federal overtime premium deduction, but double time beyond what federal law requires is treated narrowly under those rules.

How does the California day mode split my hours?

It applies Labor Code Section 510 to one workday: the first 8 hours pay your regular rate, hours 9 to 12 pay time and a half, and every hour past 12 pays double time. A 10-hour day at $22 an hour therefore pays $176.00 plus $66.00, which is $242.00. If you enter more than one day, the week total multiplies one day by the number of days, so it assumes every day worked the same hours. Days that differed should be priced separately.

I worked all 7 days in a California workweek. How is the 7th day paid?

Under Labor Code Section 510, the seventh consecutive day of work in a workweek pays time and a half for the first 8 hours and double time for every hour past 8, even if your weekly total never passed 40. A 10-hour seventh day at $22 an hour pays $264.00 plus $88.00, which is $352.00. Use the California 7th day mode for that day alone, price days 1 to 6 separately, and add the two results for the week. Each hour is paid at one rate only, never stacked.